Hardware Validation Test Engineer

Nashua, NH
Engineering
11/17/2026
Nashua
Depends on Experience 

Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive.

Position: Hardware Validation Test Engineer

Location: Nashua, NH

Amphenol High Speed Products Group is the market leader for high-speed, high-bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help enable the electronics revolution and are a key enabler for all the major Tier 1 OEMs globally. Our global headquarters is in Nashua, NH, and we have design, sales and manufacturing locations worldwide. We are seeking a Hardware Validation Test Engineer to join the HSIO Cables team in Nashua, NH.

The Hardware Validation Test Engineer will take a hands-on approach to validating the electronics inside our active high-speed cable assemblies: the paddle-card PCBAs, retimer/redriver and DSP devices, power delivery, and management interfaces that make active cables work in customer systems. You will validate board bring-up, functional and margin testing, and hardware/firmware co-validation from EVT through production release. You will join a rapidly expanding team of product and process development engineers, partnering closely with the signal integrity, hardware, and firmware design engineers.

RESPONSIBILITIES:

  • Work closely with Amphenol development engineering, worldwide factories, and customers to develop, deploy, and control hardware validation and functional testing for active cable assemblies.
  • Write validation test suites in Python or C++ for development and deployment at R&D and factory sites, including automated control of power supplies, oscilloscopes, BERTs, and thermal chambers.
  • Collaborate on engineering verification test (EVT) and design verification test (DVT) planning; generate and publish EVT and DVT reports.
  • Validate power delivery and power integrity: rail ripple, inrush, sequencing, current draw, and power class compliance across voltage and temperature corners.
  • Validate module management interfaces (I2C/SMBus, CMIS memory map, low-speed control signals, DDM/monitoring accuracy) against MSA specifications such as QSFP-DD and OSFP.
  • Work closely with hardware and firmware design engineers on firmware validation, feature testing, and regression; triage issues to root cause in hardware, firmware, or test setup.
  • Run margin and corner testing across voltage, temperature, and process to confirm link stability and performance with retimer, redriver, and DSP devices; coordinate high-speed measurements with the signal integrity validation team.
  • Support pre-compliance testing for ESD, EMC/EMI, and interoperability with host platforms and switch/NIC partners.
  • Develop next-generation hardware test systems, including custom test boards and host fixtures, that support product roadmap requirements; scope includes equipment selection, software, system integration, and documentation.
  • Gather voice-of-the-customer input to understand host system requirements and how customers will deploy and test our active cables.
  • Provide guidance to test technicians and peers.
  • Support Amphenol factories in North America and Asia; travel to install, train, and troubleshoot functional test stations.
  • Support customer reporting requirements: develop standard reports and meet with customers to review results.
  • Work with product design/development and process/manufacturing engineering teams to ensure DFT and DFMA, including test points, programming access, and production test coverage.
  • Diagnose failures and perform failure analysis and corrective action for internal and customer test failures, including component-level debug and correlation of customer findings to internal test data.

QUALIFICATIONS:

  • Engineering degree required; BS in Electrical or Computer Engineering preferred.
  • 1–5 years of experience in hardware engineering, board bring-up, or hardware validation/test.
  • Hands-on lab skills with oscilloscopes, logic and protocol analyzers, programmable power supplies, and electronic loads.
  • Ability to read schematics and PCB layouts and debug at the component level.
  • Experience with Python or C++ for test automation and instrument control.
  • Working knowledge of active electrical products and components, including serial management buses (I2C/SMBus).
  • Customer-facing and relationship-building skills; track record of collaborating with customers and suppliers.

Preferred

  • Experience with high-speed interfaces (Ethernet 400G/800G/1.6T, PCIe, 112G/224G PAM4) and devices such as retimers, redrivers, or DSPs.
  • Familiarity with CMIS and pluggable module MSAs (QSFP-DD, OSFP).
  • Experience with BERT, TDR, and VNA equipment.
  • Exposure to ESD, EMC, and thermal testing.
  • Experience with Jira, Git, and CI tools.
  • Experience working with product design and process development teams to design and deploy test programs.

ADDITIONAL:

  • Effective communication across geographically dispersed and culturally diverse groups, internal and external: USA, Canada, Mexico, China.
  • Self-initiated validation engineer with an entrepreneurial attitude and a hands-on, roll-up-your-sleeves approach.
  • Comfortable in an environment that fosters accountability and flexibility; able to prioritize projects and workflow.
  • Ability and willingness to travel to manufacturing locations and customer sites in the US, Mexico, and China